|
ALUMINUM SHEET AND PLATE SPECIALTIES |
|
ALUMINUM DIAMOND PATTERN TREAD SHEET AND PLATE PROPERTIES, CHARACTERISTICS AND SPECIFICATIONS. |
|
|
3003-H22 |
S086-H34 |
6061-16 |
|
Properties* |
|
|
|
|
Ultimate Strength |
17.0 ksi |
44.0 ksi |
42.0 ksi |
|
Yield Strength |
12.0 ksi |
34.0 ksi |
35.0 ksi |
|
Elongation |
7% |
6% |
10% |
|
Characteristics |
|
|
|
|
Weldability |
Good |
Excellent |
Good |
|
Formability |
Good |
Good |
Fair |
|
Surface Finish |
Bright, |
Nonheat- Treated |
Heat- Treated |
|
|
Reflective |
Mill Finish |
Mill Finish |
| Specifications |
|
|
|
|
Thickness |
.100-.188 in. |
.100-.188 in. |
.100-.500 in. |
|
Width |
Up to 72 in. |
Up to 60 in. |
Up to 72 in. |
|
Length |
240 in. |
240 in. |
24 in. |
|
*Mechanical property limits. The ultimate and yield strengths of alloy 5086-H34, along with its elongated properties, are essentially the same as those for alloy 6061 T6. But because 5086-H34 is a 5XXX alloy, fatigue strength is 50 percent higher. And it exhibits better formability. So alloy 5086-H34 tread plate can be substituted for alloy 6061T6 tread plate with complete confidence in most situations. |
APPROXIMATE RADII
FOR 90 COLD BEND
C-102TREAD PLATE
|
ALLOY |
THICKNESS |
|||||||||
|
AND |
.100 |
.125 |
.188 |
.250 |
.375 |
|||||
|
TEMPER |
||||||||||
|
|
R1 |
R2 |
R1 |
R2 |
R1 |
R2 |
R1 |
R2 |
R1 |
R2 |
|
3003-H22 |
3T |
2T |
3T |
2T |
3T |
2T |
- | - | - | - |
|
5086-H34 |
- |
- |
4T |
3T |
4T |
3T |
- | - | - | - |
|
6061-T6 |
- |
- |
4T |
3T |
6T |
4T |
6T |
4T |
6T |
4T |